The Microprocessor Controlled miniature BMS single zone alarm detects leaks when conductive fluids touch and bridge both conductors at its sensor.
The internal processor analyses the conductivity of the fluid before it onward signals the sample as a leak.
On detection of a fluid, the green LED changes to red and the internal Alarm relay energises and its contacts change state.
monitoring
The conductors must be kept clean and away from conductive materials to prevent spurious alarming
The system has a sensitivity adjustment to trim out excessively sensitive areas.
The BMS alarm can be installed in the area susceptible to leaks.
A regulated supply of 9v to 24v DC connects positive to the +v and negative to the -V terminal.
The sensor connected should be firmly laid to the areas the system is monitoring
The conductors must be kept clean and away from conductive materials to prevent spurious alarming
The system has a sensitivity adjustment to trim out excessively sensitive areas.
BI Colour LED: green for healthy and red for alarm
Leak alarm Relay: single throw changeover rated at 50V AC DC 1 amp
Fault alarm Relay: single throw changeover rated at 50V AC DC 1 amp
Sounder: 60BD at 10 CM
MUTE: push to make (momentary)
power consumption: 30mA max 15mA standby mode
internal operating voltage: 5v dc
PCB size: 72mm 52mm
IP 65 housing size: 80 x 80 x 50
Files coming soon.
Copyright © 2018 Knight Alarms - All Rights Reserved.
Powered by GoDaddy Website Builder